Automotive Masking Solutions by Vehicle Area
Select masking films and tapes around the vehicle area that must stay protected—from complete vehicles and repair panels to glass, trim, body gaps and precision paint lines.
Start with the Area to Protect
Begin with the vehicle area that must remain free from overspray. Then confirm the coverage size, surface condition, application duration, process temperature and required paint edge. Large areas may need masking film or pre-taped film, while recessed trim, body gaps and custom paint lines require more specialised formats. Confirm dimensions and application limits on each product page or through an inquiry.
Choose an area:
Masking Solutions by Vehicle Area
Whole Vehicle & Large-Area Protection
Cover complete vehicles and broad unpainted areas during full-body or partial refinishing. Recommended formats: MF502, MFS03 and 3 in 1 Pretaped Masking Film.
Body Panels & Local Repair Areas
Define and protect panel repair zones with tape selected for the surface, exposure and process temperature. Recommended options: MT90, MT110 and MT1203.
Glass, Lights, Trim & Recessed Parts
Protect recessed windshields, rear glass, side mouldings, door handles and lamp assemblies. MT08349 helps lift trim and conceal the paint edge.
Door Jambs, Hoods, Trunks & Body Gaps
Seal door frames, hoods, trunks and body gaps against overspray while creating a soft paint transition. Recommended: MTF402 Foam Masking Tape.
Curves, Contours & Custom Paint Lines
Create sharp separation lines across curved, moulded and custom two-tone areas. Recommended options: MT68, MT6737 and MT6738.
Featured Products by Protected Area
MT110 Waterproof Automotive Masking Tape
Model / SKU: MT110
For defining and protecting body-panel repair areas where surface, exposure and application duration must be confirmed.
MT1203 High-Temperature Masking Tape
Model / SKU: MT1203
For body-panel areas processed under defined elevated-temperature refinishing conditions.
MF502 Automotive HDPE Masking Film
Model / SKU: MF502
For whole-vehicle and large-area overspray protection during full-body or partial refinishing.
How to Select
- Protected vehicle area: whole vehicle, panel, glass or trim, body gap, or precision paint line
- Coverage size and film format
- Surface type and cleanliness
- Application duration
- Process temperature or exposure requirement
- Required paint edge and tape width
Area-Based Masking Workflow
From Protected Area to Product Format
Identify the protected vehicle area first. Then choose the coverage format and confirm surface condition, duration, process temperature and the required paint edge. Pair film with the appropriate tape for broad areas, and use trim, foam or fine-line formats where recessed parts, gaps or precision lines require specialised control. Confirm every component separately; this is not a fixed sales kit.
Frequently Asked Questions
Build the Right Masking Range for Each Vehicle Area
Share the vehicle area to protect, coverage size, surface, process temperature and required paint edge. TMILES can help review suitable formats, specifications and product combinations for your market.