NET DISC
TL930 Net backing Alumina Oxide Sanding DiscDisc format for dry sanding with dust extraction.
View product
Boat & Yacht Surface Care
Marine Maintenance
Sanding, masking and polishing products for boat repair, refinishing and gelcoat care.
Refinish or restore. Prepare and protect surfaces for repainting, or refine and polish serviceable gelcoat to recover its appearance.
APPLICATION 01
Surface Preparation & Fairing Sanding
Prepare repaired areas, cured fairing compounds and sound existing coatings before refinishing. Combine machine sanding on open surfaces with controlled hand sanding around edges, profiles and fittings.
Surfaces
Fairing compounds, primers, existing finishes
Methods
Dry orbital and supported hand sanding
Priority
Surface shape and coating compatibility
Selection guide
ASSESS
Identify the substrate, repair area and coating system.
LEVEL
Match abrasive grade and support to the surface shape.
REFINE
Follow the coating supplier’s final preparation requirements.
Recommended products
Abrasives, powered sanding and hand tools
NET ROLL
TL93V Net Alumina Oxide abrasive Sand RollFlexible net roll for supported hand sanding.
View product
SANDER
TA8828 400 W Brushless Random Orbital Electric SanderRandom orbital electric sander for dry preparation.
View product
HAND TOOL
TM1020 Manual Sanding Block for Sanding SheetsManual block for controlled pressure on sheet abrasives.
View productSelect disc diameter, hole pattern and extraction setup to match the machine. Use appropriate dust control and protection for the substrate and coating.
APPLICATION 02
Masking & Paint Preparation
Protect adjacent finishes, windows and deck fittings during local repainting. Coordinate masking materials, paint filtration and spray equipment with the coating system and the size of the repair.
Areas
Windows, fittings and adjacent finished surfaces
Processes
Masking, paint filtration and local spraying
Priority
Adhesion, clean removal and overspray control
Selection guide
PROTECT
Match tape to the surface and expected exposure time.
PREPARE
Filter compatible coatings before spray application.
APPLY
Confirm nozzle, air supply and coating requirements.
Recommended products
Masking, filtration and spray equipment
MASKING TAPE
Multi-surface original Blue painters tape MT3090Blue tape for protecting compatible adjacent surfaces.
View product
MASKING FILM
Automotive HDPE Masking Film MF502HDPE film for covering areas around paint repairs.
View product
Spray-gun selection depends on coating viscosity, nozzle and available air supply. This range is not a specification for large-area airless or antifouling application.
APPLICATION 03
Paint Defect Removal & Fine Sanding
Refine local defects and sanding marks before polishing, where the cured coating permits correction. Choose the least aggressive effective process and keep edge areas and remaining film thickness under control.
Surfaces
Correctable cured topcoats and gelcoat
Formats
Film abrasive and finishing foam discs
Priority
Controlled scratch refinement before polishing
Selection guide
CHECK
Confirm that sanding and polishing are permitted for the coating.
REFINE
Match the abrasive sequence to the defect and remaining finish.
FINISH
Use finishing foam abrasives where finer scratch refinement is needed.
Recommended products
Film abrasives, finishing foam and dry-sanding equipment
FILM DISC
TL803 Ceramic Film Sanding Abrasive DiscFilm-backed abrasive disc for controlled scratch refinement.
View product
FINISHING FOAM DISC
TL68 Hookit Foam Abrasive Sanding DiscFoam-backed finishing abrasive before compounding.
View productSANDER
TA8828 400 W Brushless Random Orbital Electric SanderElectric orbital sander for compatible dry-sanding stages.
View productTL68 is a finishing abrasive, not a general-purpose hand sponge. TA8828 is shown for dry sanding; any wet process requires equipment explicitly approved for wet use.
APPLICATION 04
Gelcoat Polishing & Gloss Restoration
Restore the appearance of serviceable gelcoat with a pad and compound combination matched to its condition. Separate wool compounding from soft-foam finishing, and start with a small test area before treating the wider surface.
Surface
Serviceable gelcoat
Equipment
Rotary polisher and matched backing plate
Priority
Pad size, speed limit and compound choice
Selection guide
COMPOUND
Select wool and a suitable compound for the correction required.
REFINE
Change to a clean finishing pad and compatible polish.
INSPECT
Check surface clarity and heat before continuing.
Recommended products
Wool, finishing foam and a rotary polisher
WOOL POLISHING PAD
TL061 Orange Wool Polishing Pad150 mm wool pad for rotary or dual-action polishing.
View product
SOFT FINISHING PAD
TL001 - Black Soft Foam Polishing PadSoft black foam pad for the final finishing stage.
View product
ROTARY POLISHER
TA8839 Professional-Grade 1200 W Buffer Polisher1200W rotary polisher with M14 spindle.
View productUse a backing plate and pad size approved for the machine. TA8839 lists a maximum pad size of 180 mm. Confirm pad speed limits and compound suitability.
For Distributors & Professional Maintenance Teams
Build a focused marine maintenance range
Coordinate abrasives, masking materials, polishing pads and equipment around the surface-care work your customers perform.
Application-based product selection
Abrasive, pad and machine matching
OEM packaging and private-label coordination
Sample and specification review
Discuss your boat-care application
Tell us the surface material, coating, repair goal and equipment in use.